For other brands usernames and passwords please see below:

Camera Manufacturer	Username	Password	Default IP
3xLogic	admin	12345	192.0.0.64
ACTI	Admin or admin	123456	192.168.0.100
American Dynmics	admin	admin	192.168.1.168
Arecont Vision	admin	no set password	no default/DHCP
Avigilon	admin	admin	no default/DHCP
Axis	root	pass or no set password	192.168.0.90
Basler	admin	admin	192.168.100.x
Bosch	service	service	192.168.0.1
Bosch	Dinion	no set password	192.168.0.1
Brickcom	admin	admin	192.168.1.1
Canon	root	Model# of camera	192.168.100.1
CBC Ganz	admin	admin	192.168.100.x
Cisco	no default	no set password	192.168.0.100
CNB	root	admin	192.168.123.100
Costar	root	root	unknown
Dahua	admin	admin	192.168.1.108
Digital Watchdog	admin	admin	192.168.1.123
DRS	admin	1234	192.168.0.200
DVTel	Admin	1234	192.168.0.250
DynaColor	Admin	1234	192.168.0.250
FLIR	admin	fliradmin	192.168.250.116
Foscam	admin	[leave blank]	unknown
GeoVision	admin	admin	192.168.0.10
Grandstream	admin	admin	192.168.1.168
GVI	Admin	1234	192.168.0.250
HIKVision	admin	12345	192.0.0.64
Honeywell	administrator	1234	no default/DHCP
IOImage	admin	admin	192.168.123.10
IPX-DDK	root	Admin or admin	192.168.1.168
IQInvision	root	system	no default/DHCP
JVC	admin	Model# of camera	no default/DHCP
LTS	admin	123456	192.0.0.64
March Networks	admin	[leave blank]	unknown
Merit Lilin Camera	admin	pass	no default/DHCP
Merit Lilin Recorder	admin	1111	no default/DHCP
Messoa	admin	Model# of camera	192.168.1.30
Mobotix	admin	meinsm	no default/DHCP
Northern	admin	12345	192.168.1.64
Panasonic	admin	12345	192.168.0.253
Panasonic	admin1	password	192.168.0.253
Pelco	admin	admin	no default/DHCP
PiXORD	admin	admin	192.168.0.200
PiXORD	root	pass	192.168.0.200
QVIS	Admin	1234	192.168.0.250
Samsung	root	4321 or admin	192.168.1.200
Samsung	admin	4321 or 1111111	192.168.1.200
Sanyo	admin	admin	192.168.0.2
Sentry360	Admin	1234	192.168.0.250
Sony	admin	admin	192.168.0.100
Speco	root	root	192.168.1.7
Speco	admin	admin	192.168.1.7
StarDot	admin	admin	no default/DHCP
Starvedia	admin	no set password	no default/DHCP
Toshiba	root	ikwb	192.168.0.30
Trendnet	admin	admin	192.168.10.1
UDP	root	unknown	unknown
Ubiquite	ubnt	ubnt	192.168.1.20
W-Box	admin	wbox123	192.0.0.64
Wodsee	admin	[leave blank]	unknown
Verint	admin	admin	no default/DHCP
VideoIQ	supervisor	supervisor	no default/DHCP
Vivotex	root	no set password	no default/DHCP

CCTV IP Camera Default Usernames, Passwords and IP Addresses Setting

  Acti

Username: Admin/admin
Password: 12345/123456
IP address: 192. 168.0.100

Arecont Vision
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps
1-Access the camera's web interface by typing the IP in your web browser.
2-Under the Administration or System tab, click on Restore to Factory Default.
3-Once the camera reboots, all settings on the camera will be restored to factory default

AXIS
For an old system:
Username: Root
Password: Pass
IP Address: 192.168.0.90
But new generation AXIS cameras have a resetting sequence
1-Remove the Ethernet cable
2-Press and hold the control button and insert the Ethernet cable again while holding the control button.
3-Hold the control button until the amber lights turn on.
4-Then release the button .
5-Wait about 1 minute.
6-When the amber lights turns into the green lights your camera is resetted and your passoword as well

BOSCH
For old models:
Username: service
Password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)

DAHUA
Username: admin
Password: admin

GEOVISION
Username: admin
Password: admin
IP Address: 192.168.1.108

HIKVISION
For old models (before firmware 5.3.0)
Username: admin
Password: 12345
IP Address: 192.0.0.64
For new models you can reset password via SADP tool. Please click the link below and follow the instructions on the pdf file
Hikvision password resetting guide

LTS Security
Username: admin
Password: 12345 or123456
IP Address: 192.0.0.64
For platinum models please click the link below for pdf file.
LTS platinum series password reset

Messoa
Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30
Mobotix:
Username: admin
Password: meinsm

SAMSUNG Techwin
For old models
Username: admin
Password: 111111 or 1111111
For new models
Username: admin
Password: 4321
IP Address: 192.168.1.200

SONY
Username: admin
Password: admin
IP Address: 192.168.0.100

Speco
For old models:
Username: root or admin
Password: root or admin
For new models:
Username: admin
Password: 1234
IP Address: 192.168.1.7

Ubiquiti
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
Videocomm
Username: admin
Password: 12345

Vivotek
None . You can choose your own password after setup. If you want to reset it
1-Press and hold down the reset button for at least 1 minute
2-Power on the camera until the red light flashes rapidly
Now your camera is back to factory default without any password